D GB F I109705-09.2013-DGbFITrFK30/235 N FK30/275 N FK30/325 N FK30/235 K FK30/275 K FK30/325 K FK30/235 TK FK30/275 TK FK30/325 TK FKX30/2
10 D GB F I09705-09.2013-DGbFITr3 | Areas of application3.5 TK versionModels available:• FK30/235 TK • FK30/275 TK • FK30/325 TK• FKX30/235 TK • F
D GB F I1109705-09.2013-DGbFITrAaAa4 | Compressor assembly4.1 Setting up4.2 Maximum permissible inclinationATTENTION! Poor lubrication can damage
12 D GB F I09705-09.2013-DGbFITr4 | Compressor assembly4.3 V-belt drive 4.4 Main bearing load 4.5 Installation of electromagnetic clutch assembly A
D GB F I1309705-09.2013-DGbFITr4 | Compressor assembly4.7 Pipes Pipes and system components must be clean and dry inside and free of scale, swarf a
14 D GB F I09705-09.2013-DGbFITr4 | Compressor assembly4.9 Operating mode of the lockable service connectionsPipe connectionPipe connectionFig. 16Ope
D GB F I1509705-09.2013-DGbFITr5| Commissioning5.1 Preparations for start-up5.4 Evacuation First evacuate the system and then include the compress
16 D GB F I09705-09.2013-DGbFITrAfter starting, check the compressor's oil level. Drive motor in operating condition "High idle". Co
D GB F I1709705-09.2013-DGbFITrFig. 185| CommissioningAs changing the shaft seal involves opening the refrigerant circuit, this is recommended only i
18 D GB F I09705-09.2013-DGbFITrFK30 / ...235 N235 TK275 N275 TK325 N325 TK235 K275 K325 KDesignation Art.-No. Art.-No. Art.-No. Art.-No.Set of gasket
D GB F I1909705-09.2013-DGbFITr6.6 DecommissioningClose the shut-off valve on the compressor. Drain the refrigerant (it must not be discharged direc
2 D GB F I09705-09.2013-DGbFITr 1 Safety 4 1.1 Identication of safety instructions 1.2 Qualications required of personnel 1.3 Ge
20 D GB F I09705-09.2013-DGbFITr7 | AccessoriesA screw-in option is provided for the sensor element on the hot gas side of the compre
D GB F I2109705-09.2013-DGbFITr8 | Technical dataType Nu. of Cylin-dresDisplace-mentcm3Swept volume(1450 rpm)m3/hWeightkgDischargelineDVmm / inchSuct
22 D GB F I09705-09.2013-DGbFITr9 | Dimensions and connectionsShaft endCentre of gravityFig. 19Dimensions in () = K - Design * = FK30/235Dimensions in
D GB F I2309705-09.2013-DGbFITr9 | Dimensions and connectionsSVDVSuction lineDischarge line see technical data, Chapter 8AConnectio
24 D GB F I09705-09.2013-DGbFITr10 | Installation certificateINSTALLATION CERTIFICATEfor using the compressors within the European Union(in accordance
D GB F I2509705-09.2013-DGbFITrDear customer,Bock compressors are top-quality, reliable and service-friendly quality products. If you have any quest
26 D GB F I09705-09.2013-DGbFITr09705-09.2013-DGbFITr © GEA Group AG. All rights reserved.GEA Refrigeration TechnologiesGEA Bock GmbHBenzstraße 7, 72
D GB F I309705-09.2013-DGbFITrContents Page 1 Safety 4 1.1 Identication of safety instructions 1.2 Qualications req
4 D GB F I09705-09.2013-DGbFITr1.1 Identicationofsafetyinstructions:DANGER! Indicates a dangerous situation which, if not avoided, will cause
D GB F I509705-09.2013-DGbFITr1| SafetyThese assembly instructions describe the standard version of the FK30 manufactured by Bock. The compressor is
6 D GB F I09705-09.2013-DGbFITr2 | Product descriptionThree different designs are available for various ranges of application:> for air-conditionin
D GB F I709705-09.2013-DGbFITr2 | Product description/FK 03325NX1 Type designation2 Displacement at 1450 rpm3 ND (LP): max. permissible operating
8 D GB F I09705-09.2013-DGbFITr3 | Areas of application ATTENTION! Compressor operation is possible within the limits of application shown
D GB F I909705-09.2013-DGbFITr3 | Areas of applicationDesignforotherrangesonrequestMax. permissible operating pressure high-pressureside(HP):
Comments to this Manuals