Gea-bock F18 User Manual

D GB F E196246-07.2014-DGbRuengineering for a better world GEA Refrigeration TechnologiesBock Compressor F18Assembly instructionsF18/2735 FX18/2735F

10 D GB F E96246-07.2014-DGbRu4| Compressor assembly4.1 Setting upFig. 10Fig. 11Fig. 12FEDCBA1234FEDC4321ABTol.-Ang. DIN ISO 2768-mKRa RzMaßPassung

D GB F E1196246-07.2014-DGbRu4| Compressor assembly4.3 Pipe connections The pipe connections have stepped internal diameters so that pipes with

12 D GB F E96246-07.2014-DGbRu4| Compressor assembly4.6 Operating the shut-off valves4.5 Laying suction and discharge linesAruleofthumb:Alwaysl

D GB F E1396246-07.2014-DGbRu4| Compressor assembly4.7 OperatingmodeofthelockableserviceconnectionsFig. 18Fig. 19CompressorCompressorPipe conn

14 D GB F E96246-07.2014-DGbRu4| Compressor assembly4.8 Drive The compressors can be driven by V-belts or directly by shaft couplings.V-belt: Proper

D GB F E1596246-07.2014-DGbRu4| Compressor assemblyWhen the compressor is at a standstill, refrigerant diffuses into the lubrication oil of the comp

16 D GB F E96246-07.2014-DGbRu5| Commissioning5.2 Pressure strength test5.1 Preparations for start-up5.3 Leaktest5.4 EvacuationThe compressor has

D GB F E1796246-07.2014-DGbRu5| Commissioning5.5 Refrigerant charge5.6 Shaft sealCAUTION Riskofinjury!Contactwithrefrigerantcancausesevereb

18 D GB F E96246-07.2014-DGbRu5| Commissioning5.7 Shaft seal change5.8 Start-up Check that the safety and protection devices (pressure switch, motor

D GB F E1996246-07.2014-DGbRuTopreventoilslugging: Theoilreturnfromtheoilseparatormustbeguidedbackattheintendedconnection(D1)ont

2 D GB F E96246-07.2014-DGbRuAbout these instructionsRead these instructions before assembly and before using the compressor. This will avoid misunder

20 D GB F E96246-07.2014-DGbRu6.1 Preparation6.2 Worktobecarriedout6| MaintenanceAccessories available can be found on the Internet at www.bock.d

D GB F E2196246-07.2014-DGbRu6| Maintenance6.6 Decommissioning 6.5 Excerpt from the lubricant tableTheoilgradelledasstandardinthefactoryis

22 D GB F E96246-07.2014-DGbRuWARNING Several capacity regulators cannot switch at the same time during compressoroperation!Otherwisethesuddencha

D GB F E2396246-07.2014-DGbRu8| Technical dataTypeNo. of cylindersDisplacement(1450/1740 rpm)WeightConnections ¹)Oil chargeRotation speed rangeDischa

24 D GB F E96246-07.2014-DGbRu9| Dimensions and connectionsF18 F18/2735 F18/3235 Shaft end Fig. 24Dimensions in mmFig.

D GB F E2596246-07.2014-DGbRu9| Dimensions and connectionsSVDVSuction lineDischarge line see technical data, Chapter 7AConnection s

26 D GB F E96246-07.2014-DGbRu10| Declaration of installationDECLARATION OF INSTALLATIONfor using the compressors within the European Union(inaccorda

D GB F E2796246-07.2014-DGbRuDear customer,Bockcompressorsaretop-quality,reliableandservice-friendlyqualityproducts. Ifyouhaveanyquestio

28 D GB F E96246-07.2014-DGbRu96246-07.2014-DGbRu © GEA Group AG. All rights reserved.GEA Refrigeration TechnologiesGEA Bock GmbHBenzstraße 7, 72636

D GB F E396246-07.2014-DGbRuContents Page 1 Safety 4 1.1 Identicationofsafetyinstructions 1.2 Qualicationsrequiredofpers

4 D GB F E96246-07.2014-DGbRu1.1 Identicationofsafetyinstructions:1 | Safety1.2 QualicationsrequiredofpersonnelWARNING Inadequatelyqualied

D GB F E596246-07.2014-DGbRu1 | Safety1.4 Intended use1.3 Safety instructionsWARNING Riskofaccidents. Refrigerating compressors are pressurised m

6 D GB F E96246-07.2014-DGbRu2 | Product description 8-cylinder opentypecompressorforexternaldrive(V-beltorcoupling) with oil pump lubric

D GB F E796246-07.2014-DGbRu2 | Product description/F 183235XFig. 32.3 Type code (example)¹)X - Ester oil charge (HFC refrigerantR134a,R404A/R50

8 D GB F E96246-07.2014-DGbRu3 | Areas of application Thecompressorsarelledwiththefollowingoiltypeatthefactory: - for R134a, R404A/R5

D GB F E996246-07.2014-DGbRu3.3 Operating limits3| Areas of applicationR134aFig. 5R404A/R507Fig. 6R407CFig. 7R22Fig. 8Design for other areasonrequ